Description
The PMI Advance Filter Analyzer is used for Quality Control and R&D in industries worldwide such as non-woven/woven, filter media, Polymeric membranes, electro-spun membranes, automotive filters, battery separators, ceramics, geotextiles, paper, battery separators & electrodes etc.
It measures the diameter of the most constricted part of a through pore (pore throat, largest pore diameter, Mean flow pore diameter, Pore diameter range, Pore distribution, Gas permeability
Specifications:
β Pore Size from: .013 microns to 500
β Mass Flow Rate: 200LPM
β Pressure Range: 500 PSI
β Through-pores only
β Pressure sensing accuracy: 0.1 of Full Scale
β Pressure & Flow Resolution: 1/60,000 of full scale (1 part in 60,000)
β Porosity by wetting method
β Power Requirements:110VAC/60Hz
β Extra flow meter; typically, 10 SLM
β Extra pressure gauge; typically, 5 PSI
Pore Structure Characteristics:
β Mean Pore Size
β Pore Size Distribution
β Bubble Point (Largest Pore)
β Gas Permeability
β Liquid Permeability
β Hydrohead
β 0γ500 PSI Test Pressure
β Liquid Expulsion Technique
β Measures pores as low as 0.013ΞΌm
β Extra Pressure Transducer for large pore measurement accuracy
β Water intrusion pressure
β Gas Permeability
β Liquid Permeability
Applications:
β Filtration Industry
β Good for woven, nonwovens
β Membrane
β Composites
β Battery/Fuel Cells Industry
β Ceramic Industry
β Geo-textiles/Textiles Industry
β Paper Industry
